Do you know how to take fire protection measures for industrial control cables? Next we will explain to you:
The following fire prevention measures shall be taken for industrial control cables:
1. The fire prevention measures for industrial control cables meet the design requirements.
2. The holes where the industrial control cable passes through the shaft, wall, floor or enters the electrical panel and cabinet shall be tightly sealed with fireproof plugging material.
3. In order to prevent multiple cables on the cable rack from being threatened by fire in the vicinity, the cables can be directly laid on the fireproof cable tray.
4. For industrial control cables of important circuits, they can be laid separately in special channels or fire-resistant closed boxes, or they can be applied with fire-resistant coating and fire-resistant tape.
5. All cables laid within the range of 2 meters on both sides of the intermediate joint or branch joint of the industrial control cable laid in the cable trench, cable tunnel or cable tray of the cable layer shall be coated with the fireproof coating of the industrial control cable in several times to reach the coating thickness specified by the manufacturer. For any cable crossing the floor and wall, within 2 meters on both sides of the crossing, fire retardant coating shall also be applied as required.
To sum up, some fire prevention measures should be taken for industrial control cables. In addition, we can also wrap the industrial control cable fireproof tape on the cable, playing the same role as the cable fireproof coating. In order to ensure the effectiveness of the fire prevention measures for industrial control cables, after the completion of the construction of the fire prevention measures for industrial control cables, the application or installation of the fire prevention coating shall be checked regularly, and the places where the fire prevention coating falls off or is damaged shall be repaired in time to ensure its normal fire prevention function.
